Auto Dialer
Model # DL-125C
This 2 channel / message dialer will call up to 4 different numbers upon alarm. Two channels allows you to have one message for burlary alarms and another message for another type of alarm such as fire. Can be triggered from an alarm system or independently. Channels can be triggered by voltage or NO or NC contact closure. Also has listen in feature upon activation so that you can monitor sounds from the location via the dialers built in mic. Can be powered from most alarm systems directly. Requires 12 VDC.
• 2 alarm inputs (Z-1 & Z-2).
• When each input is triggered, a specific prerecorded verbal
message is reported to 4 remote telephones.
• When an event occurs, it can be reported to different 4
telephones or (if both inputs are connected in parallel) to
different 8 telephones.
• The target telephone numbers may be frequently
reprogrammed by the user.
• If the telephone line is disconnected, the two output terminals
LF (solid state switch) are shorted or open (programmable).
These terminals can be used to send a signal to the alarm
system for telephone line failure indication.
• The alarm logic of each input can be programmed by the
installer (activation when alarm input is "open" or "closed").
• Selectable Pulse or DTMF dialing method.
• Certain functions can be performed in response to DTMF
control commands received from remote telephones.
